About Us

At Ace Solves It All, we live by our motto of “One Call Solves It All.” Founder Charlie Depari got his start as an electrical contractor, and came to the Kissimmee area in 1994, when he founded our company. Since that time, we’ve grown into a full service plumbing, air conditioning, heating and solar services business. In addition to being a lead-certified firm, our technicians are NATE-certified, backflow certified, and are highly trained. When we come to your home, our technicians will treat it with respect—just as they would want their own home treated.

We strive for the absolute best in service for each of our clients. This is why we not only offer 24-hour same-day emergency services, but also do not charge extra for these services during our extended business hours of 7 A.M. – 7 P.M. We wholeheartedly believe that your life should not be put on hold due to any type of home services emergency. We even arrive to each service call with a fully stocked truck of all the common parts we would need for same-day repairs.

Contact us today for any and all of your plumbing, HVAC, electrical, or solar needs.

Ace Maintenance Program

Air Conditioning System Inspection

  • Clean condensation line, flush and test. this is very important, since they clog up all the time
  • Check for float switch & check for proper operation. all systems should have a float switch to protect property from water damage
  • Inspect cleanliness of evaporator coil and pan in place and apply coil cleaner and pan strip to help keep drain pan and coil clear and clean
  • Apply protective coating on condensor to protect from the environment
  • Replace customer supplied filter
  • Clean vegetating dirt around condensor and wash out unit
  • Oil motors if needed
  • Check thermostat for accuracy and check battery if needed
  • Visual inspection of duct work and check for leaks
  • Test unit in a/c and heat mode
  • Check supply and return air temperatures
  • Check amp draws on all motors and systems
  • Check refrigerant pressures
  • Check all connections and contacts
  • Check all capacitors for proper size and operation
  • Check float switch for safe operation
  • Check blower wheel for cleanliness and balance

Plumbing Inspection

  • Test all valves in home to make sure they are operational and check for leaks
  • Locate and check main water valve and show homeowner where it is located
  • Check all drains for leaks, quite often there is a leak which over time can cause a lot of damage
  • Check washing machine hoses, they are a big source of water leaks in the home and should have stainless braided hoses
  • Inspect toilet components and change standard flapper(s) in up to two toilets as needed
  • Check for leaks and do dye test on toilets when requested
  • Power flush the water heater to get all particles out
  • Check age of water heater and condition
  • Check anode rod in water heater, as they do not last the life of the water heater and protect the tank
  • Check garbage disposal for proper operation and check for leaks
  • If requested, check home’s water quality

Electrical Inspection

  • Test all gfi receptacles and arc fault circuits inside and outside
  • Change batteries and test all smoke detectors
  • Check all connections in electrical panel and make sure it meets code requirements and is safe
  • Make sure the proper sized breakers are present, wiring size and manufacturer matches and meets code
  • Test main electrical panel outside for safety
  • Locate main electrical breaker and show homeowner it’s location for emergencies
  • Test and inspect all switches